Smoke Scrubber
| General Specification (approx) | SI NPU 500 | SI NPU 1500 (one piece) | SI NPU 4000 |
| Flow Rate | M3/Hr 850 / CFM 500 | M3/Hr 2295 / CFM 1500 | M3/Hr 5950 / CFM 3880 |
| Weight | 19 kg | 35 kg | 91 kg |
| Dimensions | 490 x 440 x 370 mm | 560 x 490 x 830 mm | 790 x 700 x 1250 mm |
| Pre-Filter Size | 305 x 305 x 51 mm | 380 x 380 x 102 mm | 610 x 610 x 102 mm |
| Hose Size (if required) | 152 mm | 305 mm | 406 mm |
| Typically suitable for cleaning room volumes of 100m³ in 15 minutes. | Typically suitable for clearing room volumes of 250-300m³ in 15 minutes. | Typically suitable for clearing room volumes of 600-700m³ in 15 minutes. |
For many years Concept have produced specialist aerosol and smoke generating equipment for the chemical, biological and nuclear industries, for testing the efficacy of the HEPA fitters in these "Clean Room" environments.
Concept have now utilised that technology in producing a range of "Smoke Scrubbers" that can quickly and efficiently draw in smoke laden air and produce clear air on the output side of the HEPA filter bank.
This means that users who have a requirement to produce smoke in an internal environment where normal venting of the smoke would be impractical can still clear smoke laden air from that environment at the touch of a button.
These units are ideal for clearing smoke laden air from aircraft simulators, computer suites or any area where venting to outside is impractical or undesirable.
Replacement filters are readily available.
If necessary, the Smoke Scrubbers can be mounted adjacent to the room or enclosure being vented, and the smoke extracted from that enclosure via a flexible hose. Typically, for example, in aircraft simulator applications, the Smoke Scrubber is mounted in the simulator hall, and a suitable umbilical hose is taken from the input side of the Scrubber to the Simulator cabin.