The Concept Colt Turbo 4 Portable Smoke Generator
| General Specification (approx) | Concept Colt 4 'Turbo' |
| Size (cm) | 36 x 14 x 20 |
| Weight (kg) | 7 |
| Heat Exchanger Wattage (W) | 2200 |
| Power Supply | 208-230v. 50/60Hz |
| Optional | 110v, 50/60hz 110v, 400hz (Basic variant) |
| Warm up time from cold (mins) | 4 |
| Duration of aerosol at maximum output (mins) | 7.5-8 |
| Smoke output (m3/min @ 1.5m visibility) | 0-233 |
| Hang time index | HTI 4 - 6 / 1.25 - 1.5 hours |
| Particle Size (micron, mass median diameter) | 0.2-0.3 |
| Operation 'Off Power' | Basic and Hybrid variants |
| Operation 'Remote' | Hybrid variant |
The Turbo variant of our best selling Colt 4 incorporates a much larger mass, precision machined heat exchanger block, and 2 x 1100w Firerod cartridge heaters switched via a solid state relay.
The result - almost twice the smoke output of the standard Colt 4, and the ability to make smoke "Off Power" for longer - because it has a greater amount of retained energy within the heat exchanger.
With its enhanced performance, the Colt 4 Turbo is capable of smoke logging larger volumes, more quickly, and to denser smoke concentrations than any other similar system. However, the smoke output is completely adjustable, so, if required, smoke output can be reduced from a powerful plume to a small wisp.
In service with numerous fire authorities world-wide, many NATO forces (including the USN and Royal Navy for shipboard training), as well as analytical laboratories, asbestos removal specialists, and HVAC and LEV contractors, the Concept Colt has an enviable reputation for simplicity of operation and reliability.
The entire Royal Navy and Royal Fleet Auxiliary, after extensive testing, have equipped their entire fleet with the Colt 4 Turbo smoke systems for creating safe but highly realistic fire training scenarios.
As with any of Concept's mains powered smoke generators the Colt 4 Turbo really is built to last. As standard the unit comes with a 5 year warranty & lifetime guarantee on heater block.
The unit uses the standard, one piece aluminium Colt 4 smoke can to produce an extremely persistent smoke. The can contains both the smoke chemical and the INERT propellant gas required to make the smoke. The canister automatically re-seal after use, so they can be used time and time again until exhausted.
Hire the Colt 4 Turbo Smoke Machine
The Colt 4 Turbo creates a smoke with such a small particle size, meaning much lower chemical concentrations to achieve and maintain specific smoke concentrations than conventional smoke systems. For fire training purposes this means that much safer (and more realistic) conditions can be achieved.
All Concept Colts have an enviable reputation for simplicity of operation and reliability.
Remote operation is available on the Colt 4 Turbo. A choice between a wired remote and radio remote control to suit all applications.
The use of the canisters reduces the number of moving parts within the machine to just one, resulting in exceptional serviceability and reliability.
The resulting smoke from the Colt 4 Turbo has a particle size of just 0.2 - 0.3 micron mmd. The smallest particle size in it's class. This compares to typical entertainment smoke systems that have a particle size of 1-5 microns. This means the Colt 4 Turbo doesn't just create the most persistent water based smoke available, it is also the safest. In normal operation, once the smoke has been produced and vented the class leading particle size of the Colt 4 Turbo means that there will be no discernible residue.
Re-fillable aerosol cans are also available if required which can simply be pressurised by a hand pump, airline or inert gas supply.
Available as 110v / 230v smoke generator.
Want more information, advice, or prices? email us: info@conceptsmoke.com
Smoke Machine Accessories
|
Colt 3/4 Turbo Smoke Machine Product Codes: C4-TURBO-2.2 - Colt 4 Turbo 2.2kw Smoke Machine (persistent smoke) C3-TURBO-2.2 - Colt 3 Turbo 2.2kw Smoke Machine (quickly dispersing smoke) As described above. The Colt's come as a ready to use smoke generator, including operating instructions & maintenance kit. |
 |
|
Colt 3/4 Turbo Remote Control Smoke Machine Product Codes: C4T-HYBRID-2.2 - Colt 4 Turbo Remote 2.2kw Smoke Machine C3T-HYBRID-2.2 - Colt 3 Turbo Remote 2.2kw Smoke Machine As described above but with additional 5mtr wired remote control. Also known as Colt 4 Turbo Hybrid. |
|
|
Radio Remote Control Product Code: CC-RRC The Concept Colt 3/4 Turbo smoke generator is available with an optional wireless transmitter / receiver. This will allow control of the smoke machine from as far as 150 meters away (line of sight). The Colt Turbo must have mains power for the radio remote control to operate. |
|
|
Colt 3/4 Turbo in black Product Code: CC-BLACK The Colt Turbo is available with a black enamelled shell on special request. Subject to stock. |
|
|
Colt 3/4 in Stainless Steel Product Code: CC-STAINLESS The Colt is available with a stainless steel chassis on special request. The stainless steel chassis will offer ultimate protection against the elements. Subject to stock. |
|
|
Colt PELI Case Product Code: FC-PELI-COLT Custom made PELI case to ensure the Colt is always protected. Each case will hold the smoke machine, power / remote leads, 2 x smoke aerosols and a ducting adapter. Available in a variety of colours. |
|
|
Colt Economy Carry Case Product Code: FC-ECO-COLT Custom made waterproof case to protect the Colt from the elements. Each case will hold the smoke machine, power / remote leads, 2 x smoke aerosols and a ducting adapter. |
|
|
Colt Economy Flight Case Product Code: FC-FCW-COLT A small case to hold the Colt smoke machine, power lead, remote lead and 2 Smoke Aerosols. |
|
|
Concept Colt 4 Aerosols (persistent) Product Code: C4-AEROSOLS Box of 10 Colt 4 Aerosols. The resulting smoke from the Colt 4 smoke canister is very persistent. The canister is a one-piece aluminium vessel, eliminating any chances of rust occurring on the seam and prolonging the life of the aerosol. |
|
|
Concept Colt 3 Aerosols (quickly dispersing) Product Code: C3-AEROSOLS Box of 10 Colt 3 Aerosols. The resulting smoke from the Colt 3 smoke canister is quickly dispersing. The canister is a one-piece aluminium vessel, eliminating any chances of rust occurring on the seam and prolonging the life of the aerosol. |
|
|
Refillable Smoke Canisters Product Code: CC-REFILL Once this canister has been filled with Concept's Smoke Fluid A (see below), it can be pressurised via an in-built Schrader valve and pump / airline. If used with care a single canister will last 25+ operations. Refillable canisters can reduce overseas carriage costs due to not being pressurised. |
|
|
Concept Smoke Fluid A Product Code: S/FLUID-A-5 Smoke Fluid A is designed to give the most persistent smoke effect possible. It can be used in refillable smoke canisters (as above). One 5Ltr bottle of Smoke Fluid A will last approx. 15 operations. |
|
|
High Pressure Shock Pump Product Code: CC-SHOCK For use with the refillable smoke aerosols. Designed to be small, portable and robust. To pressurise a refillable aerosol the pump requires approx. 200 actions to reach 100PSI. |
|
|
High Pressure Stirrup Pump Product Code: CC-STIRRUP For use with the refillable smoke aerosols. Designed to be small, portable and robust. To pressurise a refillable aerosol the pump requires approx. 5 actions to reach 100PSI. |
|
|
Ducting Adapters Product Code: ADAP-25-LD, ADAP-25-HD, ADAP-50, ADAP-75 These ducting adapters are designed to be attached directly onto the front of all Concept smoke machines allowing smoke to pass through flexible hose. They are available in 25mm, 50mm & 75mm. All ducting adapters are quick and easy to install. |
 |
|
Neoprene Hose 25mm Product Code: HOSE-NEO-25-2, HOSE-NEO-25-4 The neoprene hose is ideally suited for use with Concept Smoke generators. It offers a high temperature resistance, has low air frictional loss properties due to additional inner layer, is light, kink and spark proof. Available in 2mtr or 4mtr lengths. |
|
|
Silicone Hose 25mm Product Code: HOSE-SILI-25-2, HOSE-SILI-25-4 The silicone hose is also ideally suited for use with Concept Smoke generators. It offers a high temperature resistance, has low air frictional loss properties due to additional inner layer, is light, kink and spark proof. Available in 2mtr or 4mtr lengths. |
|
|
P2A 50mm & 75mm Flexible Hose Product Code: HOSE-P2A-50-10, HOSE-P2A-75-10 The P2A hose is available in 10mtr lengths (50mm or 75mm). It is a double ply PVC coated polyester fabric with an encapsulated spring steel wire helix. It is very flexible and easily compressed. Available en 10mtr lengths. |
|
|
Colt Maintenance Kit Product Code: CC-MAINKIT All Colt 3 & 4 smoke machines come with a small maintenance kit / spares kit. The kit consists of a drill piece, 2 x copper sealing washers, O-ring, stainless steel sealing washer and piano wire. (The drill piece can be purchased as a separate item CC-2MMDRILL) |
|
|
Colt Spare Parts Product Code: On request We offer all the spare parts required for the Colt 3 & Colt 4 Turbo Smoke Machines. We can send spare parts directly to customers to fit themselves or we can service and repair all smoke machines in house. Common spare parts include; flow control valve, transfer tube, thermostat, heater, heat exchanger assembly, push button valve, tubing etc. For any technical queries please email techsupport@conceptsmoke.com or phone +44 (0) 1628 825 555. |
|
Need continuous smoke output?
Try the Concept Spirit 900!
Demonstration movies
Concept Colt 4 Turbo - ExternalConcept Colt 4 - Low Smoke
Concept Colt 4 Turbo - Fire Training
Concept Colt 4 - Spray Booth Testing
Concept Colt 4 - External
Concept Colt 4 - Ducted Smoke
Concept Colt 4 Turbo - Fire Internal
Downloads
Concept Colt 4 Turbo MSDSConcept Colt 4 Turbo Brochure
Concept Colt 3/4 Turbo Price List
Latest News
> view all articlesColt 4 Twin Turbo - New Product
Concept Smoke Systems are one of the leading smoke machine manufacturers... Read more >
ESS 2015
Concept are pleased to be exhibiting and supporting the Emergency Servic... Read more >
> view allTestimonials
Laing
Following an urgent hire request to verify smoke extraction systems:
"Many thanks for your quick response to our last minute request for assistance – As you will be able to see (enclosed CD) the machines worked very well indeed!"