General Specification (approx) | |
Trailing connections (oil supply & electrical) | 3m |
Weight (kg) | 9.5 |
Power Supply | 230vAC 50hz 110v AC 60hz optional |
Vaporiser Power Dissipation | 90w Max (30v:3A ac) |
Warm up time from cold | 3 minutes |
Oil Consumption (average) / capacity | 60ml/hr / 400ml |
This smoke generator was designed to facilitate the observation of air movements and air tracing in many types of air flow situations, primarily in wind tunnels.
The unit is easily transported, has a rapid warm up time and simple to set up and use, and produces a controllable, non hazardous smoke effect.
The Concept Aerotech Smoke Wand produces a point source of smoke on the end of a 425mm long stainless steel "wand". Commonly used when a very precise point source of aerosol smoke is required.
The Smoke generator is now available in stainless steel.
You may also be interested in:
The smoke is produced by peristaltically pumping an innocuous, medicinal quality white oil to the tip of a probe, where a low voltage electrical coil heats it to produce a dense plume of smoke, at exactly the point where it is needed.
The probe is shaped to minimise wake generation, ensuring that the smoke can be entrained into the airstream smoothly. A stable and clearly defined plume of smoke up to 5m in length can be generated.
Want more information, advice or prices? email us: info@conceptsmoke.com
Smoke Machine, Accessories & Consumables
Concept Aerotech Smoke Wand (complete system) Product Codes: CEL-SGS-90 As described above. The Concept Aerotech Smoke Wand comes complete with; Control Box, Swan Neck Probe (approx 425mm long), 2 x Vaporiser Tips & 3 x 500ml Bottles of Smoke Oil 135. Every unit comes complete with the operating instructions.
|
|
Swan Neck Probe (spare) Product Codes: CEL-SGS-SNP Spare Swan Neck Probe (approx 425mm in length). |
|
Extension Handles Product Codes: 300mm Extension: CEL-SGS-EXT300 600mm Extension: CEL-SGS-EXT600 900mm Extension: CEL-SGS-EXT900 1200mm Extension: CEL-SGS-EXT1200 1500mm Extension: CEL-SGS-EXT1500 1800mm Extension: CEL-SGS-EXT1800 The Extension Handle allows extra reach. Easy connected onto the Swan Neck Probe. Available in a variety of lengths to suit. Specify handle length in extra 300mm lengths. |
|
Vaporiser Tips Product Codes: CEL-SGS-VT1, CEL-SGS-VT5 Spare vaporiser tips are available. With care each tip should last for approx. 40 hours. Available individually or in packs of 5. |
|
Concept Smoke Oil 135 Product Codes: S/OIL-135-0.5, S/OIL-135-2.5, S/OIL-135-5 Smoke Oil 135 (oil based) can be used in the Aerotech Smoke Wand. Smoke Oil 135 is available in 0.5, 2.5 or 5ltr containers. The smoke system uses approx 60ml of fluid per hour. |
|
Concept Smoke Fluid A Product Codes: S/FLUID-A-0.5, S/FLUID-A-2.5, S/FLUID-A-5 Smoke Fluid A (water based) can be used in the Aerotech Smoke Wand. Smoke Fluid A is available in 0.5, 2.5 or 5ltr containers. The smoke system uses approx 60ml of fluid per hour. |
|
For further technical information please contact:
Concept Smoke Systems are one of the leading smoke machine manufacturers... Read more >
Concept are pleased to be exhibiting and supporting the Emergency Servic... Read more >
> view all"I was very impressed with the smoke generators provided by Concept Engineering and feel they could be confidently recommended at our group meetings to other tunnel operators who may be contemplating an emergency exercise.
The reaction of the tunnel environmental control system visibility sensors to the smoke was excellent, not only did the fans cut in but the volume of smoke was such that it immediately tripped a high level alarm which additionally sends a signal in the form of a general alarm to the Sussex Police Headquarters. Had the smoke been generated by a real incident the alarm would have alerted the Police to the problem in the tunnel probably before a call was made from a tunnel emergency phone."
After Operation Orpheus - Dartford Tunnel